Shipping Delays With Covid-19 May Occur. Tell Your Clients To Plan Accordingly. Carriers Are Not Adjusting.

Creek Manufacturing E Series Inks

5 products

  • Creek Manufacturing E Series Bulk DTG Ink (Epson Repurposed DTG'S/5113 Heads)

    Creek Manufacturing E Series Bulk DTG Ink (Epson Repurposed DTG'S/5113 Heads)

    It's a new era in Direct To Garment. A new ink is here and ready to impress you with great results! Manufactured and supervised by Anthony Creek. A solid name in the Direct To Garment industry.  Compatibility Epson based DTG's with a DX5 and DX7 head. Printers with a 5113 head and more. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Jetability We manufactured to give a great print and minimize small tiny holes in our white inks (pinholes). This gives a great overall look for DTG. Washability Our white is bright and CMYK has excellent washability. You will notice the difference and be pleased with the results. Quality Assurance We test each batch in our printers and document the results so that you know you will be getting a good quality product when its in your hands.  Our ink is made in a professional lab that is very clean and with experienced chemists to ensure quality. Directions: Cure CMYK only prints at 325°F/162°C for 60 seconds at a minimum. You can cure at a higher temp and time also but with certain garments heat may scorch the garment Cure W+CMYK prints at 338°F/170°C for 130 seconds. Using a higher temp will cure faster. Poly/Cotton/Rayon blends work well as well as 100% cotton. Poly/Cotton only blends achieve better results when used with a conveyor/heat press combination. Use low to medium pressure. *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling.   Conversions If you are converting from other inks you will NOT need to flush your current ink set out.  SDS sheets are available upon request.  *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed and will depend on machine settings/environment. If using for DTF you should test before purchasing large volumes. DTG Printer Compatibility Since Creek Manufacturing TruColours Full Spectrum Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, TXPLUS, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $49.99 - $500.00

  • Creek Gen 2 Manufacturing DTG Ink (DTG/DTF HYBRID) Freejet 330TX / TX PLUS Compatible

    Creek Gen 2 Manufacturing DTG Ink (DTG/DTF HYBRID) Freejet 330TX / TX PLUS Compatible

    It's a new era in Direct To Garment. A new ink is here and ready to impress you with great results! Manufactured and supervised by Anthony Creek. A solid name in the Direct To Garment industry.  Compatibility Any 5113/Athenajet Printer/Artiprint/Focus DigitalDX5/DX7 heads Will need a humidity of 50% or higher on wide printers that are more than 13 inches wide.  Jetability We manufactured to give a great print and minimize small tiny holes in our white inks (pinholes). This gives a great overall look for DTG. Washability Our white is bright and CMYK has excellent washability. You will notice the difference and be pleased with the results. Quality Assurance We test each batch in our printers and document the results so that you know you will be getting a good quality product when its in your hands.  Our ink is made in a professional lab that is very clean and with experienced chemists to ensure quality. Directions: Cure CMYK only prints at 325°F/162°C for 60 seconds at a minimum. You can cure at a higher temp and time also but with certain garments heat may scorch the garment Cure W+CMYK prints at 338°F/170°C for 130 seconds. Using a higher temp will cure faster. Poly/Cotton/Rayon blends work well as well as 100% cotton. Poly/Cotton only blends achieve better results when used with a conveyor/heat press combination. Use low to medium pressure.   Conversions If you are converting from other inks you will NOT need to flush your current ink set out.  SDS sheets are available upon request.  *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed and will depend on machine settings/environment. If using for DTF you should test before purchasing large volumes. DTG Printer Compatibility Since Creek Manufacturing TruColours Full Spectrum Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, TXPLUS, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $45.00 - $145.00

  • Creek Manufacturing Changeover/DTG Starter Ink Kit (Epson Repurposed DTG'S)

    Creek Manufacturing Changeover/DTG Starter Ink Kit (Epson Repurposed DTG'S)

    Our STARTER KITS FOR Epson based DTG's/DX5/DX7 compatible printers INCLUDES: SMALL KITS: -250ML TRUCOLOUR CMYK -1 LITER TRUCOLOUR WHITE -1 GALLON CREEK MANUFACTURING UNIVERSAL PRETREAT - 2 LITER/HALF GALLON OF CREEK MANUFACTURING VIBRANT LIGHT PRETREAT -500mL PURPLE HAMMER -500ml  WET CAP SOLUTION   MEDIUM KITS: -500ML TRUCOLOUR CMYK -2 LITERS TRUCOLOUR WHITE -1 GALLON CREEK MANUFACTURING UNIVERSAL PRETREAT -1 GALLON OF CREEK MANUFACTURING VIBRANT LIGHT PRETREAT -1 LITER PURPLE HAMMER -1 LITER WET CAP SOLUTION   LARGE KITS: -1 LITER TRUCOLOUR CMYK -2 LITERS TRUCOLOUR WHITE -1 GALLON CREEK MANUFACTURING UNIVERSAL PRETREAT -1 GALLON OF CREEK MANUFACTURING VIBRANT LIGHT PRETREAT -2 LITER PURPLE HAMMER -1 LITER WET CAP SOLUTION DTG Printer Compatibility Since Creek Manufacturing TruColours Full Spectrum Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed and will depend on machine settings/environment. If using for DTF you should test before purchasing large volumes. BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $399.99 - $989.99

  • VERSION 2 STRETECH Creek MFG E/F Series Compatible Bulk DTG/DTF HYBRID Ink

    VERSION 2 STRETECH Creek MFG E/F Series Compatible Bulk DTG/DTF HYBRID Ink

    **STRETCH WHITE ONLY AVAILABLE WITH CREEK DARK/UNIVERSAL PRETREATS.** It's a new era in Direct To Garment. A new ink is here and ready to impress you with great results! Manufactured and supervised by Anthony Creek. A solid name in the Direct To Garment industry.  Compatibility  Epson Repurposed machines, F series compatible We are not affiliated with Epson Jetability We manufactured to give a great print and minimize small tiny holes in our white inks (pinholes). This gives a great overall look for DTG. Washability Our white is bright and CMYK has excellent washability. You will notice the difference and be pleased with the results. Quality Assurance We test each batch in our printers and document the results so that you know you will be getting a good quality product when its in your hands.  Our ink is made in a professional lab that is very clean and with experienced chemists to ensure quality. Directions: Cure CMYK only prints at 325°F/162°C for 60 seconds at a minimum. You can cure at a higher temp and time also but with certain garments heat may scorch the garment Cure W+CMYK prints at 338°F/170°C for 130 seconds. Using a higher temp will cure faster. Poly/Cotton/Rayon blends work well as well as 100% cotton. Poly/Cotton only blends achieve better results when used with a conveyor/heat press combination. Use low to medium pressure.   Conversions If you are converting from other inks you will NOT need to flush your current ink set out.  SDS sheets are available upon request.  DTG Printer Compatibility- F Series DTG Printers only *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed and should be tested for your application before purchasing larger quantities. This ink is not guaranteed to work with DTF, only because some films maybe incompatible and humidity varies from location to location so please test first. 

    $149.99 - $297.99

  • 220ML Creek Manufacturing E Series Ink Bags -4880 Epson, Neoflex, Flexijet 4880/4800 DTG Printers

    220ML Creek Manufacturing E Series Ink Bags -4880 Epson, Neoflex, Flexijet 4880/4800 DTG Printers

    These bags contain 220ml of TruColour Full Spectrum Digital Ink. The product is used for replacing the bag inside a 4880/4800 cartridges. You will need to reset the chip on the cartridge after replacing, to make the machine think the cartridge is new and unused. Please see our video tutorial to see how to replace the bag in the cartridge. You can choose on any color you want on the options below. Its compatible with the Neoflex, Flexijet, I-Dot, T Jet Blazer, or RJet systems. Please note we do not have any affiliation with these companies.   DTG Printer Compatibility Since Creek Manufacturing TruColours Full Spectrum Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $39.99 - $330.00

Login

Forgot your password?

Don't have an account yet?
Create account