DuPont Artristri P5000 Ink Bags

Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, and many more (see below). Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.   DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

Read more less

These bags contain 220ml of Dupont ink. The product is used for replacing the bag inside a 4880/4800 cartridges. You will need to reset the chip on the cartridge after replacing, to make the machine think the cartridge is new and unused. Please see our video tutorial to see how to replace the bag in the cartridge. You can choose on any color you want on the options below. Its compatible with the Neoflex, Flexijet, I-Dot, T Jet Blazer, or RJet systems. Please note we do not have any affiliation with these companies.

Read more less

Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.   DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

Read more less

Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.   DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

Read more less

Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.   DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

Read more less

Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.   DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

Read more less

A huge one liter refillable DTG Ink bag - buy ink in bulk and refill your own bags to save money now!

Read more less

These bags contain 220ml of TruColour Full Spectrum Digital Ink. The product is used for replacing the bag inside a 4880/4800 cartridges. You will need to reset the chip on the cartridge after replacing, to make the machine think the cartridge is new and unused. Please see our video tutorial to see how to replace the bag in the cartridge. You can choose on any color you want on the options below. Its compatible with the Neoflex, Flexijet, I-Dot, T Jet Blazer, or RJet systems. Please note we do not have any affiliation with these companies.   DTG Printer Compatibility Since Creek Manufacturing TruColours Full Spectrum Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

Read more less