Our STARTER KITS FOR Epson repurposed/based DTG's/DX5/DX7 compatible printers INCLUDES:
SMALL KITS:
-250ML TRUCOLOUR CMYK
-1 LITER TRUCOLOUR WHITE
-1 GALLON CREEK MANUFACTURING UNIVERSAL PRETREAT
-500mL PURPLE HAMMER
-500ml WET CAP SOLUTION
MEDIUM KITS:
-500ML TRUCOLOUR CMYK
-2 LITERS TRUCOLOUR WHITE
-1 GALLON CREEK MANUFACTURING UNIVERSAL PRETREAT
-1 LITER PURPLE HAMMER
-1 LITER WET CAP SOLUTION
LARGE KITS:
-1 LITER TRUCOLOUR CMYK
-2 LITERS TRUCOLOUR WHITE
-1 GALLON CREEK MANUFACTURING UNIVERSAL PRETREAT
-2 LITER PURPLE HAMMER
-1 LITER WET CAP SOLUTION
*Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed and will depend on machine settings/environment. If using for DTF you should test before purchasing large volumes.
Epson based DTG's with a DX5 and DX7 head. Printers with a 5113 head and more. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson.
Epson based DTG's with a DX5 and DX7 head. Printers with a 5113 head and more. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson. The Direct-To-Garment Ink – EPSON® Repurposed DTG Compatible ink is neither produced nor endorsed by the above listed companies. User assumes liability in using this product. Any company listed companies are registered trademarks of the respective companies.
WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.
