Shipping Delays With Covid-19 May Occur. Tell Your Clients To Plan Accordingly. Carriers Are Not Adjusting.

DTG Inks

20 products

  • Creek Manufacturing E Series Bulk DTG Ink (Epson Repurposed DTG'S/5113 Heads/ Freejet 330tx)

    Creek Manufacturing E Series Bulk DTG Ink (Epson Repurposed DTG'S/5113 Heads/ Freejet 330tx)

    It's a new era in Direct To Garment. A new ink is here and ready to impress you with great results! Manufactured and supervised by Anthony Creek. A solid name in the Direct To Garment industry.  Compatibility Epson based DTG's with a DX5 and DX7 head. Printers with a 5113 head and more. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Jetability We manufactured to give a great print and minimize small tiny holes in our white inks (pinholes). This gives a great overall look for DTG. Washability Our white is bright and CMYK has excellent washability. You will notice the difference and be pleased with the results. Quality Assurance We test each batch in our printers and document the results so that you know you will be getting a good quality product when its in your hands.  Our ink is made in a professional lab that is very clean and with experienced chemists to ensure quality. Directions: Cure CMYK only prints at 325°F/162°C for 60 seconds at a minimum. You can cure at a higher temp and time also but with certain garments heat may scorch the garment Cure W+CMYK prints at 338°F/170°C for 130 seconds. Using a higher temp will cure faster. Poly/Cotton/Rayon blends work well as well as 100% cotton. Poly/Cotton only blends achieve better results when used with a conveyor/heat press combination. Use low to medium pressure. *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling.   Conversions If you are converting from other inks you will NOT need to flush your current ink set out.  SDS sheets are available upon request.  *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed and will depend on machine settings/environment. If using for DTF you should test before purchasing large volumes. DTG Printer Compatibility Since Creek Manufacturing TruColours Full Spectrum Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, TXPLUS, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $49.99 - $500.00

  • Genuine (P5000 / P5910) DuPont Artistri Bulk DTG Ink (E SERIES)

    Genuine (P5000 / P5910) DuPont Artistri Bulk DTG Ink (E SERIES)

    Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.  *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $36.00 - $574.99

  • Image Armor DTG  Bulk Ink (E Series)

    Image Armor DTG Bulk Ink (E Series)

    Image Armor  Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). IMAGE ARMOR E-SERIES INK has a 35 second cure time!*(CMYK only, White is 90 seconds.) IMAGE ARMOR E-SERIES INK was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  IMAGE ARMOR E-SERIES INK has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Image Armor Ink: Cure the Image Armor Inks at 356F for 35 seconds(CMYK)/90 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.   DTG Printer Compatibility Since the new E-SERIES inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to):   *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY Printers Any Epson Based DIY Printer Other Printers MS Zero, MS-One, Advantage, 

    $59.99 - $149.99

  • R-Series  Image Armor Anajet mPower/Mp5/MP10/Ricoh Ri3000/Ri6000 Ink Bags

    R-Series Image Armor Anajet mPower/Mp5/MP10/Ricoh Ri3000/Ri6000 Ink Bags

     Image Armor Super Bright White Ink for all Ricoh based garment printers including Anajet mPower MP5 and MP10. IMAGE ARMOR R-SERIES INK has a 35(CMYK)/90(White) second cure time  IMAGE ARMOR R-SERIES INK was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  IMAGE ARMOR R-SERIES INK has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Many users have experienced better printability and coverage when used with Image Armor Pretreatments. You can experience awesome looking DTG prints on some of the "less" than perfect shirts that you would normally stay away from. If you have been printing for a while you know what this means.

    $44.99 - $79.99

  • Creek Manufacturing -iGEN 4 SERIES INK BAGS for Anajet mPower/ MP5/MP10/Ricoh Ri3000/Ri6000

    Creek Manufacturing -iGEN 4 SERIES INK BAGS for Anajet mPower/ MP5/MP10/Ricoh Ri3000/Ri6000

    It's a new era in Direct To Garment. A new ink is here and ready to impress you with great results! Manufactured and supervised by Anthony Creek. A solid name in the Direct To Garment industry.  Jetability We manufactured to give a great print and minimize small tiny holes in our white inks (pinholes). This gives a great overall look for DTG. Washability Our white is bright and CMYK has excellent washability. You will notice the difference and be pleased with the results. Quality Assurance We test each batch in our printers and document the results so that you know you will be getting a good quality product when its in your hands.  Our ink is made in a professional lab that is very clean and with experienced chemists to ensure quality.https://www.dtgprinterparts.com/products/trucolour-industrial-i4-full-spectrum-ink-for-anajet-mpower-ricoh-ri3000-ri6000

    $39.99 - $69.99

  • IMAGE ARMOR R SERIES BULK INK For Anajet mPower/Ri1000/Ricoh Ri3000/Ri6000

    IMAGE ARMOR R SERIES BULK INK For Anajet mPower/Ri1000/Ricoh Ri3000/Ri6000

     Image Armor Super Bright White Ink for all Ricoh based garment printers including Anajet mPower MP5 and MP10. IMAGE ARMOR R-SERIES INK has a 35(CMYK)/90(White) second cure time  IMAGE ARMOR R-SERIES INK was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  IMAGE ARMOR R-SERIES INK has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Many users have experienced better printability and coverage when used with Image Armor Pretreatments. You can experience awesome looking DTG prints on some of the "less" than perfect shirts that you would normally stay away from. If you have been printing for a while you know what this means.   *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling.

    $94.99 - $144.99

  • 220ML Genuine DuPont Artistri DTG White Ink Bag - Epson 4880/4800 DTG Printers

    NEOFLEX COMPATIBLE 220ML Genuine DuPont Artistri DTG White Ink Bag - Epson 4880/4800 DTG Printers

    Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, and many more (see below). Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.   DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $46.99

  • Creek Manufacturing Industrial iGen4 BULK Inks for Anajet mPower/Ri1000/Ricoh Ri3000/Ri6000

    Creek Manufacturing Industrial iGen4 BULK Inks for Anajet mPower/Ri1000/Ricoh Ri3000/Ri6000

    It's a new era in Direct To Garment. A new ink is here and ready to impress you with great results! Manufactured and supervised by Anthony Creek. A solid name in the Direct To Garment industry.  Jetability We manufactured to give a great print and minimize small tiny holes in our white inks (pinholes). This gives a great overall look for DTG. Washability Our white is bright and CMYK has excellent washability. You will notice the difference and be pleased with the results. Quality Assurance We test each batch in our printers and document the results so that you know you will be getting a good quality product when its in your hands.  Our ink is made in a professional lab that is very clean and with experienced chemists to ensure quality. *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed, if using for dtf you will need to test for your application before purchasing for larger amounts. 

    $80.00 - $625.00

  • Creek Manufacturing Changeover/DTG Starter Ink Kit (Epson Repurposed DTG'S)

    Creek Manufacturing Changeover/DTG Starter Ink Kit (Epson Repurposed DTG'S)

    Our STARTER KITS FOR Epson based DTG's/DX5/DX7 compatible printers INCLUDES: SMALL KITS: -250ML TRUCOLOUR CMYK -1 LITER TRUCOLOUR WHITE -1 GALLON CREEK MANUFACTURING UNIVERSAL PRETREAT - 2 LITER/HALF GALLON OF CREEK MANUFACTURING VIBRANT LIGHT PRETREAT -500mL PURPLE HAMMER -500ml  WET CAP SOLUTION   MEDIUM KITS: -500ML TRUCOLOUR CMYK -2 LITERS TRUCOLOUR WHITE -1 GALLON CREEK MANUFACTURING UNIVERSAL PRETREAT -1 GALLON OF CREEK MANUFACTURING VIBRANT LIGHT PRETREAT -1 LITER PURPLE HAMMER -1 LITER WET CAP SOLUTION   LARGE KITS: -1 LITER TRUCOLOUR CMYK -2 LITERS TRUCOLOUR WHITE -1 GALLON CREEK MANUFACTURING UNIVERSAL PRETREAT -1 GALLON OF CREEK MANUFACTURING VIBRANT LIGHT PRETREAT -2 LITER PURPLE HAMMER -1 LITER WET CAP SOLUTION DTG Printer Compatibility Since Creek Manufacturing TruColours Full Spectrum Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed and will depend on machine settings/environment. If using for DTF you should test before purchasing large volumes. BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $399.99 - $989.99

  • 220ML Genuine DuPont Artistri DTG CMYK Ink Bag Set - Epson 4880/4800 DTG Printers

    DuPont P5000 Series DTG- 220ml Neoflex Ink Bag Set – (Epson Based 4880/4800 DTG Printers)

    These bags contain 220ml of Dupont ink. The product is used for replacing the bag inside a 4880/4800 cartridges. You will need to reset the chip on the cartridge after replacing, to make the machine think the cartridge is new and unused. Please see our video tutorial to see how to replace the bag in the cartridge. You can choose on any color you want on the options below. Its compatible with the Neoflex, Flexijet, I-Dot, T Jet Blazer, or RJet systems. Please note we do not have any affiliation with these companies.

    $180.00

  • Image Armor E-Series Ink Conversion Kits

    Image Armor E-Series Ink Conversion Kits

    NEW IMAGE ARMOR KIT SMALL KIT COMES WITH; This Small Kit Includes: (1) 250ml bottle of Cyan ink (1) 250ml bottle of Magenta ink (1) 250ml bottle of Yellow ink (1) 250ml bottle of Black ink (1) 1000ml bottle of White ink (1) Liter Purple hammer (1) 1 Gallon of Image Armor Dark Pretreatment BEFORE THE USE OF IMAGE ARMOR MAKE SURE TO FLUSH OUT THE PRINTER USING FLUSHING SOLUTION OR CLEANING SOLUTION. DO NOT MIX IMAGE ARMOR INKS WITH OTHER BRAND INKS. ONLY USE IMAGE ARMOR AS A COMPLETE SET. MEDIUM KIT COMES WITH; (1) 500ml bottle of Cyan ink (1) 500ml bottle of Magenta ink (1) 500ml bottle of Yellow ink (1) 500ml bottle of Black ink (1) 1000ml bottle of White ink (1) Liter Purple hammer (1) 1 Gallon of Image Armor Dark Pretreatment BEFORE THE USE OF IMAGE ARMOR MAKE SURE TO FLUSH OUT THE PRINTER USING FLUSHING SOLUTION OR CLEANING SOLUTION. DO NOT MIX IMAGE ARMOR INKS WITH OTHER BRAND INKS. ONLY USE IMAGE ARMOR AS A COMPLETE SET. LARGE KIT COMES WITH; (1) 1000ml bottle of Cyan ink (1) 1000ml bottle of Magenta ink (1) 1000ml bottle of Yellow ink (1) 1000ml bottle of Black ink (1) 1000ml bottle of White ink (1) Liter Purple hammer (1) 1 Gallon of Image Armor Dark Pretreatment BEFORE THE USE OF IMAGE ARMOR MAKE SURE TO FLUSH OUT THE PRINTER USING FLUSHING SOLUTION OR CLEANING SOLUTION. DO NOT MIX IMAGE ARMOR INKS WITH OTHER BRAND INKS. ONLY USE IMAGE ARMOR AS A COMPLETE SET.   Image Armor  Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). IMAGE ARMOR E-SERIES INK has a 35 second cure time!*(CMYK only, White is 90 seconds.) IMAGE ARMOR E-SERIES INK was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  IMAGE ARMOR E-SERIES INK has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Image Armor Ink: Cure the Image Armor Inks at 356F for 35 seconds(CMYK)/90 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.   *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. DTG Printer Compatibility Since the new E-SERIES inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $389.99 - $589.99

  • 220ML Genuine DuPont Artistri DTG Cyan Ink Bag - Epson 4880/4800 DTG Printers

    NEOFLEX COMPATIBLE 220ML Genuine DuPont Artistri DTG Cyan Ink Bag - Epson 4880/4800 DTG Printers

    Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.   DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $44.99

Login

Forgot your password?

Don't have an account yet?
Create account