Image Armor E-Series Ink Conversion Kits

NEW IMAGE ARMOR KIT

SMALL KIT COMES WITH;

This Small Kit Includes:

(1) 250ml bottle of Cyan ink

(1) 250ml bottle of Magenta ink

(1) 250ml bottle of Yellow ink

(1) 250ml bottle of Black ink

(1) 1000ml bottle of White ink

(1) Liter Purple hammer

BEFORE THE USE OF IMAGE ARMOR MAKE SURE TO FLUSH OUT THE PRINTER USING FLUSHING SOLUTION OR CLEANING SOLUTION. DO NOT MIX IMAGE ARMOR INKS WITH OTHER BRAND INKS. ONLY USE IMAGE ARMOR AS A COMPLETE SET.

MEDIUM KIT COMES WITH;

(1) 500ml bottle of Cyan ink

(1) 500ml bottle of Magenta ink

(1) 500ml bottle of Yellow ink

(1) 500ml bottle of Black ink

(1) 1000ml bottle of White ink

(1) Liter Purple hammer

BEFORE THE USE OF IMAGE ARMOR MAKE SURE TO FLUSH OUT THE PRINTER USING FLUSHING SOLUTION OR CLEANING SOLUTION. DO NOT MIX IMAGE ARMOR INKS WITH OTHER BRAND INKS. ONLY USE IMAGE ARMOR AS A COMPLETE SET.

LARGE KIT COMES WITH;

(1) 1000ml bottle of Cyan ink

(1) 1000ml bottle of Magenta ink

(1) 1000ml bottle of Yellow ink

(1) 1000ml bottle of Black ink

(2) 1000ml bottles of White ink

(1) Liter Purple hammer

BEFORE THE USE OF IMAGE ARMOR MAKE SURE TO FLUSH OUT THE PRINTER USING FLUSHING SOLUTION OR CLEANING SOLUTION. DO NOT MIX IMAGE ARMOR INKS WITH OTHER BRAND INKS. ONLY USE IMAGE ARMOR AS A COMPLETE SET.

IMAGE ARMOR E-SERIES INK has a 35 second cure time!*(CMYK only, White is 90 seconds.)

IMAGE ARMOR E-SERIES INK was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean. 

IMAGE ARMOR E-SERIES INK has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes!

Instructions for curing Image Armor Ink:

• Cure the Image Armor Inks at 356F for 35 seconds(CMYK)/90 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature
• Use light to medium pressure on the heat press to cure the ink.
• Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.

*Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling.

DTG Printer Compatibility