Creek Manufacturing Generation 2 POTENT UNIVERSAL (CONCENTRATE) Pretreat

2nd Day shipping options on the drop down menu will only ship out that product, everything else will separately ground or cheapest way if the FREE SHIPPING option is chosen. 

Directions for Darks are below but you can choose to use the pretreat any of these ways you'd like. Temp depends on color of the garment but darks are usually best pressed at 342F/172C  and cured at 342F/172C when using white ink. Depending on the ink you are using you may want to cure from 90-130 seconds. 

Here's what Anthony Creek recommends:

1. Hang dry then press 3 times to push fibers down 8 seconds each press. 

2.  Press 3 intervals of 17 seconds each. You need to make sure that the pretreat is dry. 3 presses push all the fibers down giving the best print. You may need to increase the amount of pretreat and drying time for thicker items

3. Conveyor drying: Conveyor dry at 330F for 3 minutes and 3 presses of 8 second intervals depending on how much pretreat is applied. 

Usually on t shirts you will need about 23 grams of pretreat and 46 for hoodies. 

We strived to make a pretreat that may achieve the following:

*Conveyor Friendly with heat press combo when drying pretreat
*Can Be Hang Dried
*Fewer Staining Issues Than our Previous Version
*Works with many DTG’s

*Concentrate Available for Cheaper Shipping Options

AND BEST OF ALL DOES NOT STAIN IN UV!

This lays down all the fibers, giving you a nice, smooth garment to print. Be sure to use our Kraft paper for darks instead of parchment paper to achieve the best quality print. The pretreatment also helps ink to adhere to the garment, giving you a more vibrant final print and little or no fibrillation (small fibers sticking up out of the ink) WHEN USING OR APPLYING PRETREATMENT PLEASE USE PROPER MATERIALS SUCH AS GOGGLES AND MASKS SHOULD BE WORN AT ALL TIMES WHEN APPLYING. 

UV results are not guaranteed, as we do not test all garments ever produced in the marketplace and we do not have control over what chemicals there might be on the garments and how they will react to our pretreat. Results of any kind are not guaranteed. We are not liable in any way for any damages or losses due to use with our products. 

This product is to be only used with 100% cotton shirts. Using with blended garments may produce results that are questionable pre and post wash. For best results please wash first 2 times alone. Garment dyes can bleed and end up grasping onto pretreated areas.

WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.