Creek Manufacturing Generation 2 LIGHT Pretreat (CONCENTRATE) FOR ALL DTG'S
Our CONCENTRATED LIGHT GARMENT PRETREAT RATIO IS 1:3
PLEASE NOTE THIS PRODUCT IS NOT OPTIMIZED FOR THE F2000/F2100. We have another product that is optimized for that called POTENT VIBRANT LIGHT PRETREAT.
This means you buy 1 liter and add 3 liters of distilled water to it to make a gallon. This will help you to save money if you are overseas or out of the country because of the savings on shipping to you!
Directions for LIGHTS are below but you can choose to use the pretreat any of these ways you'd like. Temp depends on color of the garment but lights are usually best pressed at 320F. Directions for lights are below but you can choose to use the pretreat any of these ways you'd like. Temp depends on color of the garment but lights are usually best pressed at 325F/160C and cured at the same temp or 325F/163C for 60 seconds. Our LIGHT GARMENT formula IS compatible with white ink!
Here's what Anthony Creek recommends:
1. Hang dry then press 3 times to push fibers down 8 seconds each press.
2. Press 3 intervals of 17 seconds each. You need to make sure that the pretreat is dry. 3 presses push all the fibers down giving the best print. You may need to increase the amount of pretreat and drying time for thicker items
3. Conveyor drying: Conveyor dry at 330F for 3 minutes and 3 presses of 8 second intervals depending on how much pretreat is applied.
Usually on t shirts you will need about 23 grams of pretreat and 46 for hoodies.
We strived to create a pretreat that is/does the following:
*Conveyor Friendly with heat press
*Knocks Down Fibers Well
*Can Be Hang Dried
*Works With Blended Garments
*Enhances White Ink Opacity
*Fewer Staining Issues Than our Previous Version
*Works with many DTG’s
*Concentrate Available for Cheaper Shipping Options
*Increase in Washability
This Pretreatment is a non-toxic spray that needs to be applied with a machine or mask. This pretreat is a great all in one solution to not have to switch pretreat!
Triblends, cottons and mixed cottons will work well and print well. All Direct to Garment Printers that print white ink on dark garments require some sort of garment pretreatment. Usually the pretreatment is a spray and you spray the shirt and hit it with a heat press.
This lays down all the fibers, giving you a nice, smooth garment to print. Be sure to use our light garment pressing paper for lights instead of dark garment pressing paper to achieve the best quality print. This pretreatment also helps ink to adhere to the garment, giving you a more vibrant final print and little or no fibrillation (small fibers sticking up out of the ink) PRETREATMENT IS A SERIOUS PRODUCT AND SHOULD PROPER MATERIALS SUCH AS GOGGLES AND MASKS SHOULD BE WORN AT ALL TIMES WHEN APPLYING. IT IS NON TOXIC BUT CAN BE TOXIC TO THE BODY IF INHALED. REMEMBER THAT PRETREATMENT IS GLUE, YOU BREATHE IN GLUE AND YOUR BODY WILL REACT TO THIS NEGATIVELY OVER TIME.