Creek Manufacturing Generation 2 POTENT UNIVERSAL (CONCENTRATE) Pretreat

2nd Day shipping options on the drop down menu will only ship out that product, everything else will separately ground or cheapest way if the FREE SHIPPING option is chosen. 

Our universal pretreatment is a great product to make your shop's workers and/or your life much easier! Use on both light or dark garments! Temperature to press garments will depend on the color but for the majority of them will be at 342F/172C.  Please cure white ink prints at 342F/172C  for 90-130 seconds, it will also depend on your ink type to cure fully.  

This concentrated version you will need to add 4 liters of distilled water per each 1 Liter of concentrated pretreat, so the ratio is 1:4. We recommend starting at 4 then going down especially if using a conveyor and heat press combo. You can test a small amount to start with. 

For every 3-4 liters purchased you basically make another gallon without having to pay for it, our concentrate is stable and money saving! You not only save there but on shipping also!

Here's what Anthony Creek recommends:

1. Hang dry then press 3 times to push fibers down 8 seconds each press. 

2.  Press 3 intervals of 17 seconds each. You need to make sure that the pretreat is dry. 3 presses push all the fibers down giving the best print. You may need to increase the amount of pretreat and drying time for thicker items

3. Conveyor drying: Conveyor dry at 330F for 3 minutes and 3 presses of 8 second intervals depending on how much pretreat is applied. 

Usually on t shirts you will need about 23 grams of pretreat and 46 for hoodies. 

We strived to make a pretreat that may achieve the following:

*Conveyor Friendly with heat press combo when drying pretreat
*Can Be Hang Dried
*Fewer Staining Issues Than our Previous Version
*Works with many DTG’s

AND BEST OF ALL DOES NOT STAIN IN UV!

This Pretreatment is a non-toxic spray that needs to be applied with a machine or mask. This pretreat is a great all in one solution to not have to switch pretreat!

Triblends, cottons and mixed cottons will work well and print well. All Direct to Garment Printers that print white ink on dark garments require some sort of garment pretreatment. Usually the pretreatment is a spray and you spray the shirt and hit it with a heat press.

This lays down all the fibers, giving you a nice, smooth garment to print. Be sure to use our Kraft paper for darks instead of parchment paper to achieve the best quality print. The pretreatment also helps ink to adhere to the garment, giving you a more vibrant final print and little or no fibrillation (small fibers sticking up out of the ink) 

This product is to be only used with 100% cotton shirts. Using with blended garments may produce results that are questionable pre and post wash. For best results please wash first 2 times alone. Garment dyes can bleed and end up grasping onto pretreated areas.